The OneTouch AT analyzer can capture traffic to and from the analyzer during AutoTest. The capture file can be examined to obtain detailed troubleshooting information. When AutoTest Capture is enabled, each time you run AutoTest the analyzer captures wired and Wi-Fi traffic to and from the analyzer. If you don’t save the capture, it is overwritten the next time you run AutoTest.

Enable AutoTest Packet Capture
 

1. From the Home screen, tap TOOLS
2. Tap the CAPTURE menu button
3. Under the AutoTest Capture Menu selection set Enable to On

Save AutoTest Packet Capture
 

1. Run AutoTest by pressing the TEST button
2. Once AutoTest is Complete TAP the OneTouch AT button in the upper right hand corner
3. TAP the Autotest Save Capture button

Note: AutoTest Save Capture only appears if the AutoTest Capture button is enabled AND Autotest has completed. By default the AutoTest Capture file name is in the following format pcap<date><time>.pcap